| Technical Parameters |
Unit |
Model |
| Model |
/ |
604-1 |
| Power(hp) |
/ |
60 |
| Type |
/ |
604-1, Wheeled tractor |
| Frame type |
/ |
Roll bar |
| Driving type |
/ |
4WD |
| Application |
/ |
General use |
| External dimension (L × W × H) |
mm |
3685×1505×2325(Roll bar top) |
| Wheel base |
mm |
1970 |
| Commonly used wheel tread(front/rear) or gauge |
mm |
1210/1180 |
| Wheel tread(front/rear) or gauge |
mm |
1210,1310/1105-1430 |
| Minimum ground clearance and position |
mm |
315 (Bottom of front axle) |
| Horizontal distance from front end face of clutch housing to center line of rear drive shaft |
mm |
1068 |
| Center distance of subshaft hole of transmission gear |
mm |
80.5 |
| Minimum weight |
kg |
1850 |
| Standard Counterweight (Front/Rear) |
kg |
Have |
| Minimum service ratio |
kg/kW |
41.95 |
| Number of gears (forward/backward) |
/ |
8+2 or 8+8 |
| Number of main gears |
/ |
4+1 |
| Number of range shift |
/ |
2 |
| Maximum theoretical design speed |
km/h |
31.6 |
| Connection mode between engine and main clutch |
/ |
Direct connection |
| Type of roll protection device (cabin or roll bar)type |
/ |
Roll bar or cabin |
| Engine model |
/ |
YN4EZ060-32CR |
| Engine structure |
/ |
Inline, water-cooled, four-stroke |
| Engine intake mode |
/ |
Naturally aspirated |
| Number of engine cylinders |
/ |
4 |
| Engine nominal power |
kW |
44.1 |
| Engine calibration speed |
r/min |
2300 |
| Engine cooling mode |
/ |
water cooling |
| Air filter type |
/ |
dry-type |
| Exhaust pipe noise chamber external dimensions (length × width × thickness or diameter × length) |
mm |
Φ110×400 |
| Weight of exhaust pipe noise elimination chamber |
kg |
6 |
| Steering system type |
/ |
Full hydraulic steering |
| Steering system steering control mechanism |
/ |
Steering control |
| Steering system type of steering mechanism |
/ |
Front wheel steering |
| Transmission type |
/ |
Mechanical plane composition |
| Number of transmission system boxes |
/ |
2 |
| Main gear position |
/ |
In box 2 |
| Main gear shift mode |
/ |
Mechanical graded gear |
| Auxiliary gear shift mode |
/ |
Mechanical graded gear |
| Tyre Model (Front/Rear) |
/ |
6.50-16/11.2-24 |
| Hydraulic suspension system type |
/ |
Separate |
| Type of suspension |
/ |
Three-point rear suspension |
| Suspension Category |
/ |
2Category |
| Number of hydraulic output groups |
/ |
1 |
| Full opening pressure of the safety valve of the working device |
Mpa |
16±0.5 |
| Number of splines of power take-off shaft |
/ |
6 or 8 |
| Standard speed of power output shaft |
r/min |
540/720 |
){kind=link}